This content may contain affiliate links. We earn a commission at no extra cost to you if you make a purchase. We may earn money, free services or complementary products from the companies mentioned in this post. All opinions are ours alone.
This post was sponsored by BurlapFabric.com – as always, all opinions and ideas are our own.
I don’t know about you, but I didn’t always like burlap. In my mind, it was always a bland brown color that had fraying edges that were a mess, and you couldn’t do much with it at all. Wow, that’s sure changed! Now you can get burlap in several different colors, shapes, styles. You can get it as a napkin, a bag, ribbon, banners and so much more. I love the options! I also love that I now know how How to Print on Burlap & I’m sharing a fun Valentine Date Invitation Printable for y’all to use this month!
Isn’t this banner super fun? I thought it’d be unique to not only ‘invite’ my hubby to be my Valentine date, but do it by decorating with a banner covered with the invite – he’s sure to get the message that way, right? 😉
I got this 12-pack of burlap banner pieces for the project, and though I was a bit nervous printing on a weird shape, it turned out really simple and no hassle at all!
- 12-pack of burlap banner pieces
- Printer (I used inkjet, but I’ve heard this will work on laserjet as well – but haven’t personally tried that)
- Hot glue/gun
- Valentine Invitation Printable -click on here & the 8.5×11 will download
- Colored Burlap Ribbon – if desired
A side note – the reason I really love this burlap banner pack is that it already has a filmy backing to it. Otherwise, we’d need to do additional steps with freezer paper to create a backing for going through the printer. This worked great for me without the extra though because it was already there!
Directions – Printing on the Burlap
- Cut just under the top folded-over area of the banner, removing the strip that holds the string – but save it, because we’ll reattach it later! Be sure to trim the edges a bit to get rid of any frays that could get caught in the printer.
- Do a test page on your printer to make sure you know the proper direction to load your burlap. You want it to print on the non-shiny side. We designed the file to be 8.5×11 in size, but it’s laid out so it’ll print in the bulky area of these banners, with the top at the largest width of the banner – as you can see below. After your comfortable that you know the direction to load your banner piece, place it as needed in your printer and hit print.
Directions – Attaching Rope Back On
- Use hot glue/gun to reattach the strip with the rope to the back of your banner. Don’t go very close to the sides, as you’ll need to trim a bit off so they don’t stick out.
- An easy way to trim them WITHOUT CUTTING THE ROPE is as follows:
- Cut a little slit inwards (only on that back strip, do not cut the front triangle in any of these steps) so you can push the rope enough towards the center that it won’t get cut on the edge.
- Cut the excess strip off, keeping the rope away from your scissors – and remember to avoid cutting the front triangle piece, you’re just cutting the excess along the edges!
- Repeat for other side so they’re both hidden/flush with the nice triangle edges
I love this little ‘invitation’ and how simple it was to print on burlap – I can see a lot of fun projects like this in the future! I also used this red burlap ribbon for some added ‘color’ and accent with my banner. I think it really brings out the red text!
If you like it more simple, that’s perfectly great too – it still looks incredible, and almost makes the mustache part stand out even more which is fun 🙂
Whichever way you choose, this fun Valentine date invitation is unique, simple to make and a great way to catch the invitees eyes!
If you have burlap that doesn’t already have that film layer on the back, you’ll need to add it using freezer paper and an iron, otherwise it’ll have issues printing since there’s holes/gaps in the burlap:
- Be sure you use freezer paper – NOT wax!
- Trim a piece of freezer paper so it fits your burlap shape. Trim so it fits EXACTLY – don’t forget to trim any burlap frays as well.
- Put the shiny side of the paper onto the ‘back’ of your burlap and use your iron to ‘stick’ the paper to the burlap.
- Follow the printing instructions as above – always do a test sheet to ensure you have it loaded the correct way.
- Once printed on, carefully peel off the freezer paper. It should come off easily, but if it’s sticking a bit too much, try rolling the burlap gently so it loosens it up more to peel off. Another option is putting it in the freezer, which seems to make the pieces unstick from each other.
What would YOU print on burlap?
Please note – printers and burlap may vary, so please make the best judgement when putting something other than paper through your printer. We’re simply sharing how we did it and what worked for us. We assume no responsibility if your printer/burlap is different and something gets ruined.
Other Valentine Ideas…